STRINGER
3"
PANEL BOARD
5/16" WASHER
2 X 4 X 48"
OFFSET DOWN
WOOD SCREW
2 X 4 X 48"
PANEL BOARD
(TOP)
5/16 X 3-1/2"
LAG SCREW
STEP 14: ATTACHING THE PANEL BOARD
1: THE 2 X 4 X 48" PANEL BOARD SHOULD HAVE THE HOLES OFFSET DOWN. MAKE THE TOP
OF THE BOARD FLUSH WITH THE BOTTOM OF THE PANEL BOARD (TOP)
2: PREDRILL 9/64" HOLES 2-1/2" DEEP THROUGH THE HOLES IN THE PANEL BOARD. ATTACH
THE PANEL BOARD USING 5/16 X 3-1/2" LAG SCREWS AND 5/16" WASHERS.
3: INSTALL TWO 3" WOOD SCREWS THROUGH THE CENTER OF THE PANEL BOARD INTO THE
STRINGER AS SHOWN BELOW.
41
