STEP 26: MOUNT SWING BEAM TO SWING BEAM LEGS
1: FASTEN THE SWING BEAM TO THE SWING BEAM BRACKET USING 3/8" X 7" CARRIAGE BOLTS
WITH TORQUE WASHERS ON TOP OF THE SWING BEAM, AND 3/8" LOCK NUTS WITH 3/8"
WASHERS FROM UNDERNEATH.
2: PREDRILL AN 11/64" HOLE 3" DEEP THROUGH THE MIDDLE HOLE IN THE SWING LEG BRACHET.
USE A 3/8" X 3-1/2" LAG SCREW WITH 3/8" WASHER AT THE HOLE IN THE CENTER OF THE SWING
LEG BRACKET.
3: PLACE A BOLT CAP OVER ANY EXPOSED THREADS.
3/8" X 3-1/2" LAG SCREW
3/8" WASHER
BOLT CAP
3/8" LOCK NUT
3/8" X 7" CARRIAGE BOLT
TORQUE WASHER
3/8" WASHER
53
