CORNER
POST
FRONT
SWING BEAM
SUPPORT
THIS STEP WILL REQUIRE YOU TO CLIMB ONTO THE DECK. YOU WILL NEED TO INSTALL THE BOARDS ON THE INSIDE
OF THE TARP SUPPORT AND ARCH FACE BOARD.
1: PLACE A 1 X 5 X 19-1/4" WALL PANEL BOARD 2 3/16" AWAY FROM EACH OF THE FRONT CORNER POSTS.
ATTACH EACH BOARD WITH #8 X 1-1/2" WOOD SCREWS.
2: PLACE A 1 X 4 X 11" WALL PANEL BOARD 3 FLUSH TO THE SIDE OF WALL PANEL BOARD 2. SPACE WALL PANEL
BOARD 3 1-3/16" DOWN FROM THE TOP OF THE TARP SUPPORT. ATTACH THE BOARD WITH #8 X 1-1/2" WOOD
SCREWS. REPEAT FOR THE OTHER WALL PANEL BOARD 3 ON THE OTHER SIDE.
3: PLACE A 1 X 4 X 19" WALL PANEL BOARD1 FLUSH TO THE SIDE OF WALL PANEL BOARD 3. SPACE WALL PANEL
BOARD 1 2" DOWN FROM THE TOP OF THE TARP SUPPORT. ATTACH THE BOARD WITH #8 X 1-1/2" WOOD
SCREWS. REPEAT FOR THE OTHER WALL PANEL BOARD ON THE OTHER SIDE.
4: PLACE THE 1 X 4 X 9" CONNECTOR BOARD CENTERED UNDER THE TARP CENTER POST. THE MIDDLE 2 HOLES
SHOULD BE AT THE TOP. FASTEN THE CONNECTOR BOARD TO THE WALL PANEL BOARD 1 BOARDS WITH
FOUR #8 X 1-1/4" WOOD SCREWS.
5: SLIDE THE 1 X 4 X 19" CENTER WALL PANEL BOARD UNDER THE CONNECTOR BOARD. THE HOLES IN THE CENTER
WALL PANEL BOARD SHOULD BE ON THE BOTTOM. FASTEN THE CENTER WALL PANEL BOARD TO THE CONNECTOR
BOARD WITH TWO #8 X 1-1/4" WOOD SCREWS. FASTEN THE CENTER WALL PANEL BOARD AT THE BOTTOM TO THE
ARCH FACE BOARD WITH #8 X 1-1/2" WOOD SCREWS.
STEP 32A: WINDOW SLATS
TARP CENTER POST
INSIDE VIEW
"
"
16
3
1 3
16
2"
1 X 4 X 19"
CENTER WALL
PANEL BOARD
1-4-1900-CWPB
(HAS 2 HOLES IN IT)
1 X 4 X 9"
CONNECTOR BOARD
1-4-0900-CB
1 X 4 X 19"
WALL PANEL BOARD 1
1-4-1900-WPB1
(HAS 4 HOLES IN IT)
1 X 4 X 11"
WALL PANEL BOARD 3
1-4-1100-WPB3
1 X 5 X 19-1/4"
WALL PANEL BOARD 2
1-5-1925-WPB2
#8 X 1-1/2"
WOOD
SCREW
#8 X 1-1/4"
WOOD
SCREWS
TARP SUPPORT
FRONT
CORNER
POST
ARCH FACE BOARD
SWING BEAM
SUPPORT
60
