LAG SCREW
3/8" WASHER
3/8 X 5"
USE TWO 2-1/2" WOOD
SCREWS ON EACH END
OF THE PANEL BASE
STEP 33: ENTRY PANELS
1: PLACE THE ENTRY PANELS AT THE OPENINGS ON THE LADDER AND ROCK WALL SIDES OF THE FORT.
2: THE ENDS OF THE PANELS WILL REST FLUSH AGAINST THE CORNER UPRIGHTS, WITH THE COUNTER-SUNK HOLES
FACING TOWARDS THE INSIDE OF THE UNIT.
3: USE 3/8 X 5" LAG SCREWS WITH 3/8" WASHERS IN THE COUNTER-SUNK HOLES ON THE ENTRY PANEL.
4: ON THE BASE OF THE PANELS, USE TWO 2-1/2" WOOD SCREWS IN EACH END TO FASTEN THE BASE OF THE PANEL
TO THE DECK.
52
