3/8 X 5"
3/8" WASHER
LAG SCREW
4 X 4 X 25-1/2"
MONKEY BAR SUPPORT
1: FIND THE TWO 4 X 4 X 25-1/2" MONKEY BAR SUPPORTS. THERE WILL BE ONE FOR THE LEFT SIDE, AND ONE FOR
THE RIGHT.
2: PLACE THE MONKEY BAR SUPPORTS ON THEIR APPROPRIATE SIDES, FLUSH TO THE BOTTOM OF THE MONKEY BAR
ASSEMBLY, AND AGAINST THE CENTER AND CORNER UPRIGHTS.
3: ATTACH THE MONKEY BAR SUPPORTS TO THE CENTER AND CORNER UPRIGHTS WITH 3/8 X 5" LAG SCREWS, AND
3/8" WASHERS. THE BOTTOM HOLES WILL GET A 3/8 X 5" LAG SCREW WITH A 3/8" WASHER, INTO THE MAIN FLOOR
BEAMS.
STEP 44: MONKEY BAR SUPPORTS
63
