TORQUE WASHER
BOLT CAP
LADDER ASSEMBLY
6-1/2" CARRIAGE BOLT
3-1/2" CARRIAGE BOLT
MONKEY BAR ASSEMBLY
3-1/2" CARRIAGE BOLT
3/8" WASHER
3/8" LOCK NUT
1/2" WASHER
STEP 41: MONKEY BAR ASSEMBLY
1: PLACE THE MONKEY BAR ASSEMBLY IN THE MIDDLE HOLES OF THE LADDER ASSEMBLY.
2: POSITION THE MONKEY BAR PLATE BETWEEN THE MONKEY BAR ASSEMBLY AND THE LADDER ASSEMBLY AND LINE
THE PLATE HOLES UP WITH THE TWO MIDDLE HOLES OF THE LADDER ASSEMBLY.
3: SEE BELOW FOR EXACT PLACEMENT OF THE 6-1/2", AND 3-1/2" CARRIAGE BOLTS. THE 6-1/2" CARRIAGE BOLT
WILL BE PAIRED WITH A TORQUE WASHER, WHILE THE 3-1/2" CARRIAGE BOLTS WILL BE PAIRED WITH A 1/2" WASHER.
NOTE: THE FOUR HOLES IN THE LADDER ASSEMBLY ARE FOR VARIANCES IN GRADE IN YOUR YARD. IF YOUR YARD IS
RELATIVELY LEVEL, USE THE MIDDLE HOLES FOR ASSEMBLY.
60
