3/8" WASHER
LAG SCREW
3/8 X 5"
MONKEY BAR ASSEMBLY
1: TAKE THE MONKEY BAR ASSEMBLY CREATED IN THE PREVIOUS STEP AND MOVE IT TO THE OPENING ON THE
OPPOSITE SIDE OF THE SWING BEAM. MAKE SURE THAT THE FACE OF THE RUNG ASSEMBLY IS FLUSH WITH THE
CORNER AND CENTER UPRIGHTS.
2: LEVEL AND SQUARE THE ASSEMBLY IN THE OPENING, AND ATTACH IT WITH 3/8 X 5" LAG SCREWS WITH 3/8"
WASHERS INTO THE COUNTER-SUNK HOLES.
STEP 43: ATTACHING MONKEY BAR ASSEMBLY TO FORT
62
