3/8" WASHER
DETAIL A
TORQUE WASHER
6-1/2" CARRIAGE BOLT
3/8" LOCK NUT
BOLT CAP
4 X 4 X 124"
SWING BEAM
SIDE RAIL
4 X 4 X 124"
SIDE RAIL
STEP 8: SIDE RAILS
1: PLACE THE 4 X 4 X 124" SWING BEAM SIDE RAIL FLUSH TO THE CORNER UPRIGHTS, LINING UP THE PILOT HOLES.
MAKE SURE THAT THE SIDE WITH THREE CLOSELY PATTERNED COUNTER-SUNK HOLES IS FACING DOWN.
2: ATTACH THE SWING BEAM SIDE RAIL TO THE CORNER AND CENTER UPRIGHTS USING 6-1/2" CARRIAGE BOLTS
WITH TORQUE WASHERS FROM THE INSIDE OF THE FORT, AND 3/8" LOCK NUTS WITH 3/8" WASHERS FROM THE
OUTSIDE.
3: PLACE THE 4 X 4 X 124" SIDE RAIL FLUSH TO THE CORNER UPRIGHTS, LINING UP THE PILOT HOLES.
4: ATTACH THE SIDE RAIL TO THE CORNER AND CENTER UPRIGHTS USING 6-1/2" CARRIAGE BOLTS WITH TORQUE
WASHERS FROM THE INSIDE OF THE FORT, AND 3/8" LOCK NUTS WITH 3/8" WASHERS FROM THE OUTSIDE.
5: USE BOLT CAPS TO COVER ANY EXPOSED THREADS.
6: SEE DETAIL "A" FOR A MORE DETAILED VIEW OF ASSEMBLY.
27
