Plastimo 68756, Instruction Manual

Page: 80 / 376

80
6.
Press softkey [ ] to send the Position Request call.
•
” Transmitting Position Request ” is displayed, and then the assigned channel is automatically selected.
NOTE: If Channel 70 is busy, the transceiver stands by until the channel becomes clear.
7.
When you receive a Position Reply:
•
An alarm sounds.
8. Press softkey [ ] to turn OFF the alarm.
9.
Press softkey [ ], the received information is displayed.
10. Press [
▲
]/[
▼
] to scroll the screen then check the target ’ s position.
11.
Press softkey [ ], and then press [ ] to return to the operating screen.
◆
Receiving a Position Request Call/ Polling Request Call
When an Position Request call is received:
•
The alarm sounds for 2 minutes.
•
”RCVD POS REQUEST ” is displayed.
1. Press softkey [ ] to turn OFF the alarm.
2. Press the softkey for the next operation.
Press [ ]: Ingores the call and returns to the operating screen.
•
The call is saved in the DSC Log.
•
” ” blinks continuously until you display the call message.
Press [ ]: Sends the Acknowledgement “ Able to Comply ” .
•
The call is saved in the DSC Log.
Press [ ]: Sends the Acknowledgement “ Unable to Comply ” .
•
Displays the Acknowledgement information, and then press [ ] to returns to the
operating screen.
•
The call is saved in the DSC Log.
Press[ ]: Accepts the call.
•
The received call ’ s information is displayed.
•
The call is saved in the DSC Log.
•
Press [ ] or [ ], then press [ ] to send the Position Reply call.