Plastimo 68756, Instruction Manual

Page: 67 / 376

67
·
Move cursor to “ W ” or “ E ” to select W (West Longitude) or E (Eest Longitude).
3. After position is input, press [OK] to confirm.
4. In the UTC time editing interface, enter the UTC time as follows.
·
Press [
◄
]/[
►
] to select desired number.
·
Press [OK] to enter.
·
Select ”
←
” or “
→
” , or rotate [DIAL] to move the cursor, then press [OK].
5. Press softkey [ ] to confirm position and time setting.
6. Press softkey [ ] to return to standby interface.
·
The entered position and time are displayed on the operating screen.
◆
Entering an Individual ID
You can enter a total of 60 Individual IDs, and assign names to them of up to 10 characters.
1. Display the
“ INDIVIDUAL ID ” screen.
·
” NO ID ” is displayed if no ID is entered.
2. Press softkey [ ], “ INDIVIDUAL ID ” entry screen is displayed.
3. Enter an Individual ID:
·
Press[
◄
]/[
►
]to select the desired number.
·
Press [OK] to input the selected number.
·
Select “
←
” or “
→
” to move the cursor, then press [OK].
※
The first digit is fixed as “ 0 ” for a Group ID.
※
The first two digits are fixed as “ 0 ” for any coast station ID.
4. Repeat step 3 to enter all 9 digits.
5. Then press softkey[
] to start entering the name.
6. Enter an Individual ID Name:
·
Press[
▲
]/[
▼
]/[
◄
]/[
►
] to select the desired characters.
·
Press [OK] to input the characters.
·
Select “
←
” or “
→
” to move the cursor, then press [OK].
·
Press [ ]/[ ]/[ ] to select numbers, characters and letters.
7. Then press softkey [ ]to save, and return to the previous screen.
·
The entered Individual ID name is displayed.