Plastimo 68756, Instruction Manual, Page: 76 / 376

76
•
The call is saved in the DSC Log.
Press [ ]: Accepts the call.
•
The assigned channel is automatically selected.
•
The call is saved in the DSC Log.
•
The received call ’ s information is displayed.
•
Press the softkey to select the Acknowledgement option.
(Able to Comply): Sends an Acknowledgement call without any changes.
(Unable to Comply): Sends an Acknowledgement call but cannot communicate.
(Propose New CH): Ables to communicate but proposes another channel. Specify the channel by
press[ ▲ ] or[ ▼ ].
NOTE: If the Auto ACK function is set to “ Auto (Unable) ” , the Acknowledgement “ Unable to Comply ” is
automatically sent to the calling station when the call is received. This function is set to “ Auto (Able) ” by
default.
■
Group Call
A Group call enables you to send a DSC call to only a specific group.A group of fleets corresponds to a
group call identification code, and the entire fleet will be called when the group calls.
◆
Sending a Group Call
You can send a Group call to a pre-entered group address, or manually enter the address before sending.
1. Press softkey [
], the “ OTHER DSC ” screen is displayed.
NOTE: You can also display the “ OTHER DSC ” screen by selecting the “ DSC Call ” item on the Menu
screen.
2. Select
“ Type ” , then press [OK], “ MESSAGE TYPE ” is displayed.
3. Select “ Group ” , then press [OK] or softkey [ ].
•
Returns to the “ OTHER DSC ” screen.
4. Select “ Address ” , then press [OK].
5. Select the group to send a Group call to, then press [OK].
NOTE: You can also select “ Manual Input ” to manually enter the target group.
6. Select “ Channel ” , then press [OK].
7. Select a channel to assign, and then press [OK] or softkey [ ].
•
The assigned channels are preset by default.