Plastimo 68756, Instruction Manual, Page: 66 / 376

66
The ID entering can be done only once. After entering, it can be changed only by PC programming
software.
1. Press [MENU] key, the menu interface is displayed.
2. Press [
▲
]\[
▼
] or rotate [DIAL] knob to select “ ATIS Setting ” , then select “ ATIS ID Input ” , then press
[OK], the “ ATIS ID Input ” screen is displayed.
3. Enter the ATIS ID:
·
Press [
◄
]/[
►
] to select the desired number.
·
Press [OK] to input the selected number.
·
Select
“←”
or
“→”
to move the cursor, then press [OK].
4. Repeat step 3 to enter all 10 digits.
5. After 10 digits have been input, press softkey [ ] to set the ID.
6. Enter ATIS ID again to confirm.
7. Repeat step 3 to 5 as above.
·
After setting, this transceiver can perform normal operation.
NOTE:In the menu item “ Radio Info ”, you can query the set ATIS ID.
■
DSC Address ID
Before using the DSC call related function, the DSC can be set as follows:
1. Press [MENU] key, the menu interface is displayed.
2. Press [
▲
]\[
▼
] or rotate [DIAL] knob to select “ DSC Settings ” ,
3. Press [OK], the “ DSC SETTINGS ” screen is displayed.
4. Press [
▲
]\[
▼
] or rotate [DIAL] knob to select the submenu item you want to set up.
·
The setting items includes Position Input, Individual ID, Gourp ID, Auto ACK, CH Auto SW, Data
Output, Alarm Status, CH 70 SQL Level, Self-Test, Multi-Task.
5. Press [OK] to enter next level menu.
6. Press [BACK] or softkey [ ] to return to the previous menu. Press softkey [ ] to return to
main interface.
◆
Entering the Position and Time
A Distress call should include the vessel’ s position and time. If no GPS data is received, manually input
the position and Universal Time Coordinated (UTC) time.
·
The manual entry is disabled while valid GPS data is received.
·
The manually entered position and time is valid only for 23.5 hours, or until turning OFF the transceiver.
1. Display the “ POSITION INPUT ” screen.
2. Press [
▲
]/[
▼
]/[
◄
]/[
►
] to enter longitude and latitude.
·
Press [
◄
]/[
►
] to select desired number.
·
Press [OK] to enter.
·
Select ”
←
” or “
→
” , or rotate [DIAL] to move the cursor, then press [OK].
·
Move cursor to “N” or “S” to select N (North Latitude) or S (South Latitude).