Plastimo 68756, Instruction Manual

Page: 73 / 376

73
·
” RCVD DISTRESS ” is displayed, screen backlight blinks.
1. Press softkey [ ] to turn OFF the alarm and screen backlight blinks.
2. Press the softkey below the intended operation.
Ingore [ ]
·
Ingore the call and return to the operating screen.
·
The call is saved in the DSC Log.
·
” ” blinks continuously until you display the call message.
Pause [ ]
[ ] is not displayed if the “ CH Auto SW ” item is set to “ Manual ” .
·
Pause the countdown until the assigned channel is automatically selected.
·
Select softkey [ ] to resume the countdown.
·
The call is saved in the DSC Log.
Accept [ ]
·
Accept the call.
·
Channel 16 is automatically selected.
·
Monitor Channel 16 as a coast station may require assistance.
·
After Channel 16 is selected, you can select your next operation by pressing the softkey below the
following options.
Return [ ]
·
Returns to the operating screen.
History [ ]
·
Displays the “ DISTRESS HISTORY ” screen.
Information [ ]
·
Displays the information of the received Distress call.
■
Individual Call
An Individual call enables you to send a DSC signal to only a specific station.
◆
Sending an Individual Call
1. Press softkey [ ], the “ OTHER DSC ” screen is displayed.
NOTE: You can also display the “ OTHER DSC ” screen by selecting the “ DSC Call ” item on the Menu
screen.
2. Select “ Type ” , then press [OK].
3. Select “ Individual ” , then press [OK] or softkey [ ].
•
Returns to the “ OTHER DSC ” screen.
4. Select “ Address ” , then press [OK] or softkey [ ].
5. Select the station to send an Individual call to, then press [OK] or softkey [ ].
·
Returns to the “ OTHER DSC ” screen.
NOTE: You can also select “ Manual Input ” to manually enter the target station.