Copyright Planika Sp. z o.o.
www.planikafires.com
IG0098#01
19.02.2018
5
3.2.
Unboxing and installation
•
The contents of the boxes need to be carefully unwrapped from the foam foil.
•
Remove the bags with decorative stones from the burner reservoir and place them away from it.
•
Remove the Styrofoam placed on the unit.
•
Check the completeness of the elements with the contents list.
•
Make sure that the insert nor its elements weren’t damaged during the transportation (if they were, notify
the supplier).
•
Install the GaLiO Insert fireplace in the prepared housing made according to the montage specification.
•
The decorative stones are to be scattered evenly around the reservoir to completely cover the burner of the
fireplace.
•
WARNING!!!
The stones may not cover or be placed inside the device protecting the ignition unit. (Photo 1)
Photo 1
•
In the case of GaLiO Insert powered with natural gas, to obtain the optimum image of the flame, cover the
burner with a single layer of decorative stones leaving some spaces uncovered of approximately every 10 cm
(Photo 2).
Photo 2
•
If all the points were completed according to the instruction the gas cylinder can be
now connected.
