Copyright Planika Sp. z o.o.
www.planikafires.com
IG0098#01
19.02.2018
19
1 - Italy, Switzerland: external thread M 10 x 1;
2 - Italy, Greece, Austria, Slovenia: internal thread W20X1/14 LH;
3 - United Kingdom, Finland, Iceland, Norway, Portugal, Sweden: external thread M14x1,5;
4 - Belgium, United Kingdom, France, Netherlands, Ireland, Croatia, Lithuania, Luxembourg, Macedonia,
Montenegro, Serbia, Slovakia, Slovenia, Switzerland, Spain, Czech Republic: internal thread W21,8x1/14 LH.
5.4
Pressure regulator replacement (LPG version)
1.
You always need to use a pressure regulator between the gas cylinder and the device. Replace
the pressure regulator every 5 years. Allowed pressures: 30 mbar, 37 mbar (recommended), 50
mbar. Use only the redactors that comply with the EN16129 European Norm.
2.
Turn off the GaLiO Insert – the „OFF” position. The main burner and the pilot burner need to be
turned off.
3.
Disconnect the regulator from the gas cylinder (description above).
4.
Loosen the metal clamp with the use of
a screwdriver (philips) or a flat wrench.
5.
Move the clamp away from the stub of
gas regulator.
6.
Take off the linkage from the stub of
regulator.
