Copyright Planika Sp. z o.o.
www.planikafires.com
IG0098#01
19.02.2018
3
1.
INTRODUCTION
The GaLiO Insert fireplace is a decorative fuel-effect gas appliances intended only for outdoor use.
It is obligatory to
acquaint oneself with the below installation manual and user’s manual before committing to the installation and use
of the GaLiO Insert fireplace. This manual is to be kept safe for the lifetime of the device.
2.
SAFETY INSTRUCTION
•
Read the instruction before using the device.
•
Use only outdoors.
•
The GaLiO Insert is not a free-standing device and is destined to be housed.
•
The montage of the device must take into account its trouble-free removal in case of service.
•
Do not start up the device before it’s placed safely into the prepared housing.
•
The GaLiO Insert fireplace should be installed and controlled annually according to the below installation
manual as well as enforced national and local laws regarding gas safety (installation and use).
•
One needs to assess whether the data on the product plaque complies with the local type of gas and pressure.
•
Do not change the structure of the device or its sealed elements nor modify the default settings of the GaLiO
Insert fireplace.
•
Do not set any additional imitation blocks nor any glowing coal fragments on the burner or in the combustion
chamber.
•
A ventilation grid or slot with a ventilation area of 150cm2 is required at the base of the housing. A device
without the grid or slot for ventilation will function incorrectly causing a threat of damaging the unit or causing
a fire.
•
A CO2 or a powder fire extinguisher needs to be placed near the device.
•
During the first ignition the GaLiO Insert fireplace needs to be burnt on maximum level for a few hours in order
for the elements to acquire correct temperature and for the remains of paint, lacquer and lubricant to
evaporate.
•
Do not move the device while it’s working.
•
The GaLiO Insert fireplace was designed for decorative purposes. The surface of the GaLiO Insert fireplace
(including the optional glass screens) may get hot (up to 100 degrees Celsius). WARNING!: parts of the device
that are easy to reach may be very hot. Keep children away from the device.
•
Some variants of housing for the device may require installing additional toughened glass screens (provided
separately).
•
Install the fireplace away from flammable materials.
•
When the GaLiO Insert fireplace is on it’s not to be exposed to rain.
•
When not being used the GaLiO Insert is to be protected from atmospheric conditions and the main valve of
the gas cylinder needs to be turned off.
•
All parts of the GaLiO Insert fireplace are made of stain resistant material.
•
Never leave a turned on GaLiO Insert without supervision.
•
The GaLiO Insert fireplace needs to be installed in a place inaccessible for children, unauthorised persons or
animals for the direct contact with the flame or hot parts of the device to be impossible.
•
In case of heavy wind the GaLiO Insert fireplace needs to be immediately turned off and one needs to wait
until the heavy wind passes.
•
In case of noticing any sort of gas leaks the fireplace as well as the main valve of the gas cylinder need to be
turned off.
•
After use turn off the gas cylinder valve.
