34
tor, and it relays authentication messages between the RADIUS server and client devices being
authenticated.
IEEE 802.1x EAP authentication is enabled by selecting the
Security Policy
as
802.1x
or
WPA
, and this selection is in the
Wireless Settings
under
Setup Wizard
.
Enable MAC Address Access Control:
Check this option to enable MAC address access
control through a RADIUS server.
Enable Primary/Secondary Server:
Check this if you want to enable RADIUS authentica-
tion using the primary/secondary Radius Server. If both are selected, the primary server will be
tried first.
Server IP:
The IP address of the RADIUS server
Port Number:
The port number that your RADIUS server uses for authentication. The de-
fault setting is 1812.
Shared secret:
This is used by your RADIUS server in the Shared Secret field in Radius pro-
tocol messages. The shared secret configured in the GW-AP54SAG must match the shared
secret configured in the RADIUS server. The shared secret can contain up to 64 alphanumeric
characters.
Retry Times:
The number of times the GW-AP54SAG should attempt to contact the pri-
mary server before giving up.
Reattempt Period:
After failed to contact the primary RADIUS server, the GW-AP54SAG
will re-attempt to contact the primary server every this number of minutes.
Summary of Contents for GW-AP54SAG
Page 1: ......
