29
System Location:
Description of where your GW-AP54SAG is physically located. It is an al-
phanumeric string of up to 60 characters.
System Contact:
Contact information for the system administrator responsible for managing
your GW-AP54SAG. It is an alphanumeric string of up to 60 characters.
Community String For Read:
If you intend the access point to be managed from a remote
SNMP management station, you need to configure a read-only “community string” for read-
only operation. The community string is an alphanumeric string of up to 15 characters.
Community String For Write:
For read-write operation, you need to configure a write
“community string”.
A trap manager is a remote SNMP management station where special SNMP trap messages
are generated (by the Access Point) and sent to in the network.
You can define trap managers in the system.
You can add a trap manager by entering a
name
, an
IP address
, followed by pressing the
ADD
button.
You can delete a trap manager by selecting the corresponding entry and press the
DELETE
SELECTED
button.
You enable a trap manager by checking the
Enable
box in the corresponding entry or disable
the trap manager by un-che
cking the Enable box.
MAC Filtering Settings
The GW-AP54SAG allows you to define a list of MAC addresses that are allowed or denied to
access the wireless network
Disable MAC address control list:
When selected, no MAC address filtering will be per-
formed.
Enable GRANT address control list:
When selected, data traffic from only the specified
devices in the table will be allowed in the network.
Enable DENY address control list:
When selected, data traffic from the devices specified in
the table will be denied/discarded by the network.
Summary of Contents for GW-AP54SAG
Page 1: ......
