28
Bridge
: You can enable/disable the 802.1d STP (Spanning Tree Protocol) function on the
bridge of WLAN and Ethernet (i.e. the LAN interface). Enable this function can detect loops
in your LAN environment and then protect the LAN from being saturated with infinite loop
traffic.
Syslog:
Syslog is an IETF (Internet Engineering Task Force - the Internet standards body)-
conformant standard for logging system events (RFC-3164). When the GW-AP54SAG en-
counters an error or warning condition (e.g., a log-in attempt with an invalid password), it will
create a log in the system log table. To be able to remotely view such system log events, you
need to check the
Enable Syslog
box and configure the IP address of a Syslog daemon.
When doing so, the GW-AP54SAG will send logged events over network to the daemon for
future reviewing.
Syslog server IP address:
The IP address of the PC where the Syslog daemon is running.
System Name:
A name that you assign to your GW-AP54SAG. It is an alphanumeric string
of up to 30 characters.
Summary of Contents for GW-AP54SAG
Page 1: ......
