- 4 -
Unlike the “Aad-hoc network”, where users on the LAN send data directly to
each other, the “Infrastructure” network includes an access point and users on
the “Infrastructure” network send data to that dedicated access point.
BLW-04G uses “Infrastructure” network as Wireless LANs. Each wireless LAN
PC within the range of the access point can communicate with other wireless
LAN PCs within the range.
1-2 Contents of the BLW-04G Package
After carefully unpacking the shipping carton, check the contents listed below.
1.
BLW-04G.
2.
Antenna
3.
Power Adapter.
4.
Vertical stand
5.
Twisted-pair cable (straight, 1m) x 1
6.
Short cord
7.
User’s Manual
1-3 Features of the
BLW-04G
Your BLW-04G contains the following features that make it excellent for
network connections.
y
Allows multiple users to access the Internet at the same time by
providing maximum Internet utilization to multiple users sharing a
single public IP Address.
y
Allows users on Ethernet LAN and Wireless LAN to transfer data to
each other through wireless-to-wire bridge.
y
Provides wireless access roaming, best access point selection,
loading balance, network traffic filtering included in wireless roaming
function.
y
Provides 64bits/128bits key WEP (Wired Equivalent Privacy) wireless
data encryption to secure wireless communication.
y
Fully supports 802.11 open and shared key authentications.
y
Integrates four 10/100BASE-T/TX auto-sensing switch ports.
y
Uses NAT to allow your entire network’s PCs to connect to the
Internet using only one (purchased) IP address.
y
Supports PPPoE that enable user to seamlessly connect to ISPs with
the familiar “dial-up” connection interface.
