- 20 -
y
UPnP
UPnP (Universal Plug and Play) allows automatic discovery
and configuration of equipment attached to your LAN. UPnP is by
supported by Windows ME, XP, or later. If
Enable
, this device will be
visible via UPnP.
y
Factory Defaults
Select
“Yes”
if you want to return all the router’s
current settings to their factory defaults. Note that do not restore the
factory defaults unless it is absolutely necessary.
Click
“Apply”
after making any changes.
4-6 Status Monitor
This screen shows the router’s current status. All of the information provided is
read-only.
y
Login
This column shows the login information of PPPoE or PPTP.
You can manually initiate the connection or make a disconnection by
clicking the appropriate buttons. Be aware that, if you make a
disconnection here, “
Connect-on- demand
” will not function until the
connection button is clicked. Note that “Login” won’t show any
information if you selected “
Obtain an IP automatically
” or “
Static
IP
” on the “OnePage Setup” page.
y
Internet
This section shows the IP settings status of the router as
seen by external users of the Internet. If you selected
“Get IP
Address Automatically”, “PPPoE”, or “PPTP”
in the OnePage
