- 2 -
Power:
Green Steady on when power is on.
DMZ:
Green Steady on when dedicated DMZ
port is enabled.
Status:
Red
Lights up during system checking
connections and internal operation
when the power is first switched
on. If the device works properly,
the light should switch off
automatically.
Wireless LAN
Link:
Green Steady on when AP (Access Point)
is ready.
Activity:
Green Blinking when data is flowing
through AP.
LAN / WAN ports
Link/Act: Green Steady
on
when
ADSL/Cable
Modem is properly connected and
it operates at 100Mbps.
Blinking when data is flowing
through this LAN port.
FD/Col:
Green Steady on when operating at full
duplex mode.
Off at half duplex mode.
Blinking when a collision has
occurred on this port.
100
Yellow Steady on when it operates at
100Mbps.
2-3 System Requirements and Setup
To connect to the Internet, an external ADSL or Cable modem and an Internet
access account from an ISP is required. In order to operate with the BLW-04G,
each PC that is to be connected to the BLW-04G should have the following
things installed:
8.
Ethernet NIC (Network Interface Card: a 10Base-T or
10/100Base-T/TX Ethernet card), or wireless client card for wireless
connection.
9.
Standard twisted-pair Ethernet cable (UTP network cable) with RJ-45
connectors.
10.
System OS: Windows 95/98, Windows NT4.0, or Windows 2000/XP
11.
TCP/IP network protocol.
