manualshive.com logo in svg

Planet WGSW-24000, User Manual, Page: 80 / 158

Share
Download
Planet WGSW-24000 User Manual Download Page 80

factory default is enabled. 

▫

 

LACP Mode - 

Displays whether LACP is enabled or disabled on this port.

 

7.6.47 show port protocol 

This command displays the Protocol-Based VLAN information for either the entire system, or for the 

indicated Group. 

▫

 

Format   

show port protocol {<groupid> | all} 

▫

 

Mode  

Privileged EXEC 

▫

 

Group Name - 

This field displays the group name of an entry in the Protocol-based VLAN table.

 

▫

 

Group ID - 

This field displays the group identifier of the protocol group.

 

▫

 

Protocol(s) - 

This field indicates the type of protocol(s) for this group.

 

▫

 

VLAN - 

This field indicates the VLAN associated with this Protocol Group.

 

▫

 

Interface(s) - 

This field lists the slot/port interface(s) that are associated with this Protocol Group.

 

7.6.48 show port-channel 

This command displays an overview of all port-channels (LAGs) on the switch. 

▫

 

Format   

show port-channel {<logical slot/port> | all} 

▫

 

Mode  

Privileged EXEC 

▫

 

Logical slot/port - 

The logical slot and the logical port.

 

▫

 

Name - 

The name of this port-channel (LAG). You may enter any string of up to 15 alphanumeric 

characters.

 

▫

 

Link State - 

Indicates whether the Link is up or down.

 

▫

 

Admin Mode - 

May be enabled or disabled. The factory default is enabled.

 

▫

 

Link Trap Mode - 

This object determines whether or not to send a trap when link status changes. 

The factory default is enabled.

 

▫

 

STP Mode - 

The Spanning Tree Protocol Administrative Mode associated with the port or 

portchannel (LAG). The possible values are: 

▫

 

Disable -

 Spanning tree is disabled for this port. 

▫

 

Enable -

 Spanning tree is enabled for this port. 

▫

 

Mbr Ports - 

A listing of the ports that are members of this port-channel (LAG), in slot/port notation. 

There can be a maximum of eight ports assigned to a given port-channel (LAG).

 

▫

 

Port Speed -

 Speed of the port-channel port.

 

▫

 

Type -

This field displays the status designating whether a particular port-channel (LAG) is statically 

or dynamically maintained. The possible values of this field are Static, indicating that the 

port-channel is statically maintained; and Dynamic, indicating that the port-channel is dynamically 

maintained.

 

▫

 

Active Ports - 

This field lists the ports that are actively participating in the port-channel (LAG). 

Summary of Contents for WGSW-24000































































































































































Reviews:

No comments