Planet WGSW-24000 User Manual Download Page 145

Page: 145 / 158

▫

Point To Point MAC Status -

Derived value indicating if this port is part of a point to point link.

▫

CST Regional Root -

The regional root identifier in use for this port.

▫

CST Port Cost -

The configured path cost for this port.

10.1.5 show spanning-tree mst port summary

This command displays the settings of one or all ports within the specified multiple spanning tree

instance. The parameter <mstid> indicates a particular MST instance. The parameter {<slot/port> | all}

indicates the desired switch port or all ports.

If 0 (defined as the default CIST ID) is passed as the <mstid>, then the status summary is displayed for

one or all ports within the common and internal spanning tree.

▫

Format

show spanning-tree mst port summary <mstid> {<slot/port> | all}

▫

Mode

Privileged EXEC and User EXEC

▫

MST Instance ID -

The MST instance associated with this port.

▫

Slot/Port -

The interface being displayed

▫

Type -

Currently not used.

▫

STP State -

The forwarding state of the port in the specified spanning tree instance

▫

Port Role -

The role of the specified port within the spanning tree.

▫

Link Status -

The operational status of the link. Possible values are "Up" or "Down".

▫

Link Trap -

The link trap configuration for the specified interface.

10.1.6 show spanning-tree mst summary

This command displays summary information about all multiple spanning tree instances in the switch. On

execution, the following details are displayed.

▫

Format

show spanning-tree mst summary

▫

Mode

Privileged EXEC and User EXEC

▫

MST Instance ID List - List of multiple spanning trees IDs currently configured.

▫

For each MSTID:

Associated FIDs -

List of forwarding database identifiers associated with this instance.

Associated VLANs -

List of VLAN IDs associated with this instance.

10.1.7 show spanning-tree summary

This command displays spanning tree settings and parameters for the switch. The following details are

displayed on execution of the command.

▫

Format show spanning-tree summary

▫

Mode

Privileged EXEC and User EXEC

▫

Spanning Tree Adminmode -

Enabled or disabled.

▫

Spanning Tree Version -

Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, or

IEEE 802.1d) based upon the Force Protocol Version parameter

Summary of Contents for WGSW-24000































































































































































Search results

Summary of Contents for WGSW-24000

Reviews:

Planet WGSW-24000, User Manual, Page: 145 / 158

Search results

Summary of Contents for WGSW-24000

Reviews: