manualshive.com logo in svg

Planet WGSW-24000, User Manual, Page: 144 / 158

Share
Download
Planet WGSW-24000 User Manual Download Page 144

▫

 

Root Port Identifier -

 Port to access the Designated Root for this multiple spanning tree instance 

▫

 

Associated FIDs -

 List of forwarding database identifiers associated with this instance.

 

▫

 

Associated VLANs - 

List of VLAN IDs associated with this instance.

 

10.1.4 show spanning-tree mst port detailed 

This command displays the detailed settings and parameters for a specific switch port within a particular 

multiple spanning tree instance. The instance 

<mstid>

 is a number that corresponds to the desired 

existing multiple spanning tree instance. The <slot/port> is the desired switch port. 

▫

 

Format   

show spanning-tree mst port detailed <mstid> <slot/port> 

▫

 

Mode  

Privileged EXEC and User EXEC 

▫

 

MST Instance ID 

▫

 

Port Identifier 

▫

 

Port Priority 

▫

 

Port Forwarding State -

 Current spanning tree state of this port 

▫

 

Port Role 

▫

 

Port Path Cost -

 Configured value of the Internal Port Path Cost parameter 

▫

 

Designated Root -

 The Identifier of the designated root for this port. 

▫

 

Designated Port Cost -

 Path Cost offered to the LAN by the Designated Port 

▫

 

Designated Bridge Bridge

 - Identifier of the bridge with the Designated Port. 

▫

 

Designated Port Identifier -

 Port on the Designated Bridge that offers the lowest cost to the LAN 

If 0 (defined as the default CIST ID) is passed as the <mstid>, then this command displays the settings 

and parameters for a specific switch port within the common and internal spanning tree. The <slot/port> 

is the desired switch port. In this case, the following are displayed. 

▫

 

Port Identifier - 

The port identifier for this port within the CST.

 

▫

 

Port Priority - 

The priority of the port within the CST.

 

▫

 

Port Forwarding State - 

The forwarding state of the port within the CST.

 

▫

 

Port Role - 

The role of the specified interface within the CST.

 

▫

 

Port Path Cost - 

The configured path cost for the specified interface.

 

▫

 

Designated Root -

 Identifier of the designated root for this port within the CST. 

▫

 

Designated Port Cost -

 Path Cost offered to the LAN by the Designated Port.

 

▫

 

Designated Bridge - 

The bridge containing the designated port

 

▫

 

Designated Port Identifier -

 Port on the Designated Bridge that offers the lowest cost to the LAN 

▫

 

Topology Change Acknowledgement - 

Value of flag in next Configuration Bridge Protocol Data 

Unit (BPDU) transmission indicating if a topology change is in progress for this port.

 

▫

 

Hello Time - 

The hello time in use for this port.

 

▫

 

Edge Port -

 The configured value indicating if this port is an edge port.

 

▫

 

Edge Port Status - 

The derived value of the edge port status. True if operating as an edge port; 

false otherwise.

 

Summary of Contents for WGSW-24000































































































































































Reviews:

No comments