manualshive.com logo in svg

Planet WGSW-24000, User Manual, Page: 137 / 158

Share
Download
Planet WGSW-24000 User Manual Download Page 137

authentication server. 

▫

 

Access Requests - 

The number of RADIUS Access-Request packets sent to this server. This 

number does not include retransmissions.

 

▫

 

Access Retransmission - 

The number of RADIUS Access-Request packets retransmitted to this 

RADIUS authentication server.

 

▫

 

Access Accepts - 

The number of RADIUS Access-Accept packets, including both valid and invalid 

packets, which were received from this server.

 

▫

 

Access Rejects - 

The number of RADIUS Access-Reject packets, including both valid and invalid 

packets, which were received from this server.

 

▫

 

Access Challenges - 

The number of RADIUS Access-Challenge packets, including both valid and 

invalid packets, which were received from this server.

 

▫

 

Malformed Access Responses - 

The number of malformed RADIUS Access-Response packets 

received from this server. Malformed packets include packets with an invalid length. Bad 

authenticators or signature attributes or unknown types are not included as malformed access 

responses.

 

▫

 

Bad Authenticators - 

The number of RADIUS Access-Response packets containing invalid 

authenticators or signature attributes received from this server.

 

▫

 

Pending Requests - 

The number of RADIUS Access-Request packets destined for this server that 

have not yet timed out or received a response.

 

▫

 

Timeouts - 

The number of authentication timeouts to this server.

 

▫

 

Unknown Types - 

The number of RADIUS packets of unknown types, which were received from 

this server on the authentication port.

 

▫

 

Packets Dropped - 

The number of RADIUS packets received from this server on the 

authentication port and dropped for some other reason.

 

9.1.29 show users authentication 

This command displays all user and all authentication login information. It also displays the 

authentication login list assigned to the default user. 

▫

 

Format   show users authentication 

▫

 

Mode  

Privileged EXEC 

▫

 

User -

 This field lists every user that has an authentication login list assigned. 

▫

 

System Login - 

This field displays the authentication login list assigned to the user for system 

login.

 

▫

 

802.1x Port Security - 

This field displays the authentication login list assigned to the user for 

802.1x port security.

 

9.1.30 users defaultlogin 

This command assigns the authentication login list to use for non-configured users when attempting to 

Summary of Contents for WGSW-24000































































































































































Reviews:

No comments