manualshive.com logo in svg

Planet WGSW-24000, User Manual, Page: 103 / 158

Share
Download
Planet WGSW-24000 User Manual Download Page 103

8.4.2 class-map rename 

This command changes the name of a DiffServ class. The <classname> is the name of an existing 

DiffServ class. The <newclassname> parameter is a case-sensitive alphanumeric string from 1 to 31 

characters uniquely identifying the class (Note: the class name 'default' is reserved and must not be used 

here). 

▫

 

Default   None 

▫

 

Format   

class-map rename <classname> <newclassname> 

▫

 

Mode  

Global Config 

8.4.3 match any 

This command adds to the specified class definition a match condition whereby all packets are 

considered to belong to the class. The optional [not] parameter has the effect of negating this match 

condition for the class (i.e., none of the packets are considered to belong to the class). 

▫

 

Default   None 

▫

 

Format   

match [not] any 

▫

 

Mode  

Class-Map Config 

8.4.4 match class-map 

This command adds to the specified class definition the set of match conditions defined for another class. 

The <refclassname> is the name of an existing DiffServ class whose match conditions are being 

referenced by the specified class definition.   

"

Note

:

 

There is no [not] option for this match command.

 

▫

 

Default   None 

▫

 

Format   

match class-map <refclassname> 

▫

 

Mode  

Class-Map Config 

Restrictions - 

The class types of both 

<classname>

 and 

<refclassname> 

must be identical (i.e., any vs. 

any, or all vs. all). A class type of acl is not supported by this command. Cannot specify 

<refclassname>

 

the same as 

<classname>

 (i.e., self-referencing of class name not allowed). 

At most one other class may be referenced by a class. 

Any attempt to delete the 

<refclassname>

 class while still referenced by any 

<classname>

 shall fail. 

The combined match criteria of 

<classname>

 and 

<refclassname>

 must be an allowed combination 

based on the class type. Any subsequent changes to the 

<refclassname>

 class match criteria must 

maintain this validity, or the change attempt shall fail. 

The total number of class rules formed by the complete reference class chain (includes both predecessor 

and successor classes) must not exceed a platform-specific maximum. 

In some cases, each removal of a refclass rule reduces the maximum number of available rules in the 

class definition by one. 

Summary of Contents for WGSW-24000































































































































































Reviews:

No comments