manualshive.com logo in svg

Planet WGSW-24000, User Manual, Page: 79 / 158

Share
Download
Planet WGSW-24000 User Manual Download Page 79

▫

 

Most MFDB Entries Ever Used - 

This displays the largest number of entries that have been 

present in the Multicast Forwarding Database table. This value is also known as the MFDB 

high-water mark.

 

▫

 

Current Entries 

- This displays the current number of entries in the Multicast Forwarding Database 

table.

 

7.6.45 show monitor 

This command displays the Port monitoring information for the system. 

▫

 

Format   show monitor 

▫

 

Mode  

Privileged EXEC 

▫

 

Port Monitor Mode 

indicates whether the Port Monitoring feature is enabled or disabled. The 

possible values are enable and disable. 

▫

 

Probe Port slot/port

 is the slot/port that is configured as the probe port. If this value has not been 

configured, 

'Not Configured'

 will be displayed. 

▫

 

Monitored Port slot/port 

is the slot/port that is configured as the monitored port. If this value has 

not been configured, 

'Not Configured'

 will be displayed.

 

7.6.46 show port 

This command displays port information. 

▫

 

Format   

show port {<slot/port> | all} 

▫

 

Mode  

Privileged EXEC 

▫

 

slot/port - 

The physical slot and physical port.

 

▫

 

Type -

 If not blank, this field indicates that this port is a special type of port. The possible values 

are:

 

Mon -

 this port is a monitoring port. Look at the Port Monitoring screens to find out more 

information. 

Lag 

- this port is a member of a port-channel (LAG). 

Probe

 - this port is a probe port. 

▫

 

Admin Mode - 

Selects the Port control administration state. The port must be enabled in order for 

it to be allowed into the network. - May be enabled or disabled. The factory default is enabled.

 

▫

 

Physical Mode - 

Selects the desired port speed and duplex mode. If auto-negotiation support is 

selected, then the duplex mode and speed will be set from the auto-negotiation process. Note that 

the port's maximum capability (full duplex -100M) will be advertised. Otherwise, this object will 

determine the port's duplex mode and transmission rate.

 

▫

 

The factory default is Auto. 

▫

 

Physical Status -

 Indicates the port speed and duplex mode.

 

▫

 

Link Status - 

Indicates whether the Link is up or down.

 

▫

 

Link Trap - 

This object determines whether or not to send a trap when link status changes. The 

Summary of Contents for WGSW-24000































































































































































Reviews:

No comments