Installation
5
11. Remember to restart your computer to have the new configuration take effect if the
following message is shown.
2.2 Hardware installation
Note: The hardware installation should be only performed when the software is
well installed.
Precaution
Before the installation, make sure the USB port exists in your computer and is enabled.
To check this, go to
My Computer
à
Control Panel
à
System
. Open the Device
Manager tab. If the
Universal Serial Bus controller
device is found, it means your
USB port is installed and enabled. If not, either no USB port is installed or the USB
bios is not properly enabled. In this case, consult your computer dealer for USB sup-
port.
Summary of Contents for BT-200U
Page 1: ...USB Bluetooth Adapter BT 200U User s Manual...
Page 18: ...Broadband Router User Guide 14 Figure 3 Service Icons for Windows 9x Me and 2K...
Page 19: ...Appendix C Specifications 15 Figure 4 Device Icons for Windows XP...
Page 20: ...Broadband Router User Guide 16 Figure 5 Service Icons for Windows XP...
