3.8.2 Ping6
Choose
Diagnostic
>
Ping6.
The page shown in the following figure appears.
The following table describes the parameter and button of this page:
Field
Description
Target Address
Enter the valid IP address or domain name.
Interface
Select the interface on this item.
Run Ping
Click it to start to Ping.
3.8.3 ATM Loopback
Choose
Diagnostic
>
ATM Loopback
. The page shown in the following figure appears.
In this page, you can use VCC loopback function to check the connectivity of the VCC.
The ATM loopback test is useful for troubleshooting problems with the DSLAM and ATM
network.
Click
Run Lookback
to start testing.
3.8.4 ADSL
Choose
Diagnostic
>
ADSL
. The page shown in the following figure appears. It is used
for ADSL tone diagnostics.
56
