Planet ADE-4400 User Manual Download Page 53

Page: 53 / 65

Caution:

Do not turn off the router or press the Reset button while the procedure is in
progress.

3.7.2.1 Upgrade Firmware

Click

Upgrade Firmware

in the left pane, the page shown in the following figure appears.

In this page, you can upgrade the firmware of the router.

The following table describes the parameters and button of this page:

Field

Description

Select File

Click

Browse

to select the firmware file.

Upload

After selecting the firmware file, click

Upload

to starting

upgrading the firmware file.

Reset

Click it to starting selecting the firmware file.

3.7.2.2 Backup/Restore

Click

Backup/Restore

in the left pane, the page shown in the following figure appears.

You can backup the current settings to a file and restore the settings from the file that was
saved previously.

The following table describes the parameters and button of this page:

Field

Description

Save Settings to File

Click it, and select the path. Then you can save the
configuration file of the router.

Load Settings from File

Click

Browse

to select the configuration file.

Upload

After selecting the configuration file of the router,
click

Upload

to start uploading the configuration

file of the router.

Summary of Contents for ADE-4400


































































Search results

Summary of Contents for ADE-4400

Reviews:

Related manuals for ADE-4400

Brands by name

Popular brands

Planet ADE-4400, User Manual

Search results

Summary of Contents for ADE-4400

Reviews:

Related manuals for ADE-4400

Brands by name

Popular brands