Field
Description
Password
The connection password provided by TR-069 service.
Debug
Show Message
Select
Enable
to display ACS SOAP messages on the
serial console.
CPE sends GetRPC
Select
Enable
, the router contacts the ACS to obtain
configuration updates.
Skip MReboot
Specify whether to send an MReboot event code in the
inform message.
Delay
Specify whether to start the TR-069 program after a short
delay.
Auto-Execution
Specify whether to automatically start the TR-069 after the
router is powered on.
3.5.6 ACL
Choose
Service
>
ACL
, the page shown in the following figure appears. In this page, you
can permit the data packets from LAN or WAN to access the router. You can configure the
IP address for Access Control List (ACL). If ACL is enabled, only the effective IP address
in the ACL can access the router.
Note:
If you select
Enable
in ACL capability, ensure that your host IP address is in ACL list
before it takes effect.
The following table describes the parameters and buttons of this page:
Field
Description
Direction Select
Select the router interface. You can select
LAN
or
WAN
. In this
example,
LAN
is selected.
LAN ACL Switch
Select it to enable or disable ACL function.
IP Address
Enter the IP address of the specified interface. Only the IP address
that is in the same network segment with the IP address of the
specified interface can access the router.
Services Allowed
You can choose the following services from LAN:
web
,
telnet
,
ftp
,
tftp
,
snmp
, or
ping
. You can also choose all the services.
Add
After setting the parameters, click it to add an entry to the
Current
ACL Table
.
Reset
Click it to refresh this page.
44
