The following table describes the parameters and button of this page:
Field
Description
Aging Time
If the host is idle for 300 seconds (default
value), its entry is deleted from the bridge table.
802.1d Spanning Tree
You can select
Disabled
or
Enabled
.
Select
Enabled
to provide path redundancy
while preventing undesirable loops in your
network.
Show MACs
Click it to show a list of the learned MAC
addresses for the bridge.
Click
Show MACs
, the page shown in the following figure appears. This table shows a list
of learned MAC addresses for this bridge.
3.6.2 Routing
Choose
Advance > Routing
, the page shown in the following figure appears. The page
that is displayed contains
RIP
and
Static Route.
3.6.2.1 Static Route
Click
Static Route
in the left pane, the page shown in the following figure appears. This
page is used to configure the routing information. You can add or delete IP routes.
46
