Planet ADE-4400, User Manual

Page: 49 / 65

The following table describes the parameters and buttons of this page:
Field Description
RIP
Select Enable , the router communicates with other
RIP-enabled devices.
Apply Change Click it to save the settings of this page.
Interface
Choose the router interface that uses RIP.
Receive
Version
Choose the interface version that receives RIP messages. You
can choose
RIP1 , RIP2 , or Both .

Choose RIP1 indicates the router receives RIP v1
messages.

Choose RIP2 indicates the router receives RIP v2
messages.

Choose Both indicates the router receives RIP v1 and RIP
v2 messages.
Send Version
The working mode for sending RIP messages. You can choose
RIP1 or RIP2 .

Choose RIP1 indicates the router broadcasts RIP1
messages only.

Choose RIP2 indicates the router multicasts RIP2
messages only.
Add Click it to add the RIP interface to the Rip Config List .
Delete
Select a row in the Rip Config List and click it to delete the
row.
3.6.3 Port Mapping
Choose Advance > Port Mapping, the page shown in the following figure appears.
You can set which WAN will binding with which LAN port, click add or del to change the
group member.
49