Planet ADE-4400, User Manual

Page: 21 / 65

Field Description
Default Route You can select Enable or Disable .
DNS Settings

Obtain DNS Automatically : IP address is assigned by the office
end automatically. You need not to enter the IP address.

Use the following DNS server address : If you want to enter the
DNS server address manually, select it and enter the IP addresses of
primary DNS and secondary DNS.
After finishing the configuration, click NEXT . The page shown in the following figure
appears.
PPPoE/PPPoA
In the Setup WAN Interface page, enter the correct PVC, set the channel mode to
PPPoE or PPPoA .
The following table describes the parameters of this page:
Field Description
PVC Settings

VPI : Virtual Path Identifier (VPI) is the virtual path between two
points in an ATM network, ranging from 0 to 255.

VCI : Virtual Channel Identifier (VCI) is the virtual channel between
two points in an ATM network, ranging from 32 to 65535 (0 to 31 is
21