Planet Networking & Communication WNAP-7206, User Manual

Page: 15 / 171

User Manual of WNAP-7206
-7-
NAT firewall with SPI (Stateful Packet Inspection)
NAT with ALG (Application Layer Gateway)
Built-in NAT server supporting Port Triggering, Virtual Server, and DMZ
Built-in firewall with IP address / MAC / DNS filtering
Firewall
Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter, DoS
protection
Wireless Mode
 AP

Client
 WDS PTP
 WDS PTMP
 WDS Repeater (AP+WDS)
 Universal Repeater (AP+Client)
Channel Width
20MHz / 40MHz
Wireless Isolation
Enable to isolate each connected wireless clients
64/128/152-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Wireless MAC address filtering
Wireless Security
Enable/Disable SSID Broadcast
Multiple SSID
Up to 3
Max. Wireless Client
25
Max. WDS AP
4
Max. Wired Client
60
WMM Supports Wi-Fi Multimedia
NTP
Network Time Management
Web-Based (HTTP) management interface
Supports SNMP v1/v2 agent with MIB-II
Remote management
SNTP time synchronize
Easy firmware upgrade
Configuration Backup & Restore
Management
DHCP Client List
System Log supports auto mail and save to local host
Ping Watch Dog allows you to continuously monitor the particular
connection between the device and a remote host.
Throughput Monitor provides real-time wireless throughput information
Diagnostic tool
Speed Test helps to test the connection speed