Planet Networking & Communication WNAP-7206, User Manual

Page: 103 / 171

User Manual of WNAP-7206
-95-
wireless network.
Figure 5-6-4-1 Wireless Advanced
The page includes the following fields:
Object Description

Antenna Setting
The polarization of an antenna. You can select Vertical
Antenna, Horizontal Antenna, or External Antenna.

Beacon Interval
The beacons are the packets sent by the Device to
synchronize a wireless network. Beacon Interval value
determines the time interval of the beacons. You can specify a
value between 20-1000 milliseconds. The default value is 100.

RTS Threshold
Here you can specify the RTS (Request to Send) Threshold. If
the packet is larger than the specified RTS Threshold size, the
Device will send RTS frames to a particular receiving station
and negotiate the sending of a data frame. The default value is
2346.

Fragmentation
Threshold
This value is the maximum size determining whether packets
will be fragmented. Setting the Fragmentation Threshold too
low may result in poor network performance since excessive
packets. 2346 is the default setting and is recommended.

DTIM Interval
This value determines the interval of the Delivery Traffic
Indication Message (DTIM). You can specify the value between
1-255 Beacon Intervals. The default value is 1, which indicates
the DTIM Interval is the same as Beacon Interval.

Enable WMM
WMM function can guarantee the packets with high-priority
messages being transmitted preferentially. It is strongly