User Manual of WNAP-7206
-104-
Figure 5-8-1-1
Virtual Servers
To setup a virtual server entry
,
you can follow these steps:
1. Click
the
Add New...
button.
2. Select the service you want to use from the
Common Service Port
list. If the
Common Service Port
menu
does not list the service that you want to use, enter the number of the service port or service port range in
the
Service Port
box.
3. Enter the IP address of the computer running the service application in the
IP Address
box.
4. Select the protocol used for this application in the
Protocol
box:
TCP
,
UDP
, or
All
.
5. Select
the
Enabled
option in the
Status
pull-down list.
6. Click
the
Save
button.
The page includes the following fields:
Object
Description
Service Port
The numbers of External Ports. You can enter a service port or a
range of service ports (the format is XXX - YYY, XXX is Start port,
YYY is End port).
IP Address
The IP address of the PC running the service application.
Protocol
The protocol used for this application, either TCP, UDP, or All (all
Summary of Contents for WNAP-7206
Page 1: ...User s Manual www PLANET com tw 802 11a n Wireless Outdoor AP WNAP 7206 ...
Page 78: ...User Manual of WNAP 7206 70 5 6 1 8 AP Client Router Mode WISP AP ...
Page 118: ...User Manual of WNAP 7206 110 Figure 5 8 4 2 UPnP Network Device ...
Page 151: ...User Manual of WNAP 7206 143 Figure 5 16 10 1 System Log ...