Planet Networking & Communication WNAP-7206, User Manual

Page: 134 / 171

User Manual of WNAP-7206
-126-

Destination IP
Address
The address of the network or host that you want to assign to a
static route

Subnet Mask
Determines which portion of an IP address is the network portion,
and which portion is the host portion.

Default Gateway
The IP address of the default gateway device that allows for the
contact between the Device and the network or host

Status

Enable - Select the Enabled in the Status pull-down list to
enable the entry.

Disable - Select the Disabled in the Status pull-down list to
disable the entry.

Save
Click the Save button to save the changes.

Back
Click the Back button to back to the previous page.

Enable All Click the Enable All button to enable all entries.

Disable All Click the Disable All button to disable all entries.

Delete All
Click the Delete All button to delete all entries.
5.13 Bandwidth Control
There are two submenus under the Bandwidth Control menu: Control Settings and Rules List . Click any of
them, and you will be able to configure the corresponding function. The detailed explanations for each submenu
are provided below.
5.13.1 Control Settings
Choose menu “ Bandwidth Control > Control Settings ”, and then you can configure the Egress Bandwidth and
Ingress Bandwidth in the next screen (shown in Figure 5-13-1-1 ). Their values should be configured less than
1000000Kbps.