Planar m70L, Installation Manual

Page: 53 / 108

Adjusting Position
m70L Installation & Configuration Guide 45
Adjusting Position
Position moves the picture on the screen but does not move the menus.
Picture Position
Press the
SIZE
/
POS
button once on the remote to open the
PICTURE POSITION
menu.
The four arrow keys move the picture on the screen.
The numbers for
HORIZONTAL POSITION
and
VERTICAL POSITION
refer to the number of pixels from sync to the first displayed
pixel. These numbers get smaller as the picture moves up and to
the left.
Horizontal Position
This number shows the number of pixels from the beginning of H sync to the first
active pixel. Because there are many black pixels after H sync, this number will not be
zero when the picture is at the left border of the screen.
Vertical Position
This number is the number of lines from V sync to the first active line, so it will not be
zero when the picture is at the top of the screen.
Note: Adjusting the
VERTICAL POSITION
too far may cause the image to jump or hop. If the
image appears to flicker or hop, readjust the
VERTICAL POSITION
.
P i c t u r e P o s i t i o n
U s e a r r o w k e y s t o m o v e i m a g e
H o r i z o n ta l P o s i t i o n 1 6 8
Ve r t i c a l P o s i t i o n 1 9