Planar m70L Installation Manual Download Page 21

Page: 21 / 108

Installing the Video Input Module (VIM)

m70L Installation & Configuration Guide

Installing the Video Input Module (VIM)

If you receive the optional Video Input Module (VIM) separately, use the following
instructions to install it.

Your VIM shipment should include the following items:

• VIM board

• New VIM cover

• Mounting screws

• Washers/nuts

• Ground strap

Attach the ground strap to your wrist and the chassis.

Turn off the AC power and unplug all cables.

WARNING!

Always turn off power and remove the power cord when adding or removing an

electronic part.

Remove the screws that secure the old VIM cover. Place the screws aside.

Remove the old VIM cover.

WARNING!

Failure to properly use a grounding strap can destroy sensitive electronic compo-

nents in the VIM board.

Remove the VIM board from its shipping pouch and anti-static bag.

Power switch

Power cord

Summary of Contents for m70L













































































































Search results

Summary of Contents for m70L

Reviews:

Related manuals for m70L

Brands by name

Popular brands

Planar m70L, Installation Manual

Search results

Summary of Contents for m70L

Reviews:

Related manuals for m70L

Brands by name

Popular brands