Copyright © DOME
®
imaging systems, inc., 2001. All rights reserved.
This document contains proprietary information of DOME imaging
systems, inc. It is DOME’s exclusive property. It may not be reproduced
or transmitted, in whole or in part, without a written agreement from
DOME. No patent or other license is granted to this information.
The software, if any, described in this document is furnished under
a license agreement. The software may not be used or copied except
as provided in the license agreement.
DOME imaging systems, inc. provides this publication as is without
warranty of any kind, either express or implied, including but not limited
to the implied warranties of merchantability or fitness for a particular
purpose. DOME may revise this document from time to time without
notice. Some states or jurisdictions do not allow disclaimer of express or
implied warranties in certain transactions; therefore, this statement may
not apply to you.
Information in this document about products not manufactured by DOME
is provided without warranty or representation of any kind, and DOME will
not be liable for any damages resulting from the use of such information.
DOME imaging systems, inc.
400 Fifth Avenue
Waltham, MA 02451-8738
(781) 895-1155 phone
(781) 895-1133 fax
Internet address for product information:
Internet address for sales information:
Internet address for technical support:
World Wide Web site:
www.dome.com
Part No. 40-MD5DFP-07
Product No. 55-MD5FP2
November 2001
DOME is a registered trademark and Calibration TQA, C3, C5, DIMPL,
DimplX, and Md5/DFP are trademarks of DOME imaging systems, inc.
Microsoft, ActiveX, DirectDraw, MS-DOS, Windows, and Windows NT are
either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries. Number Nine and T2R-IV are trade-
marks of Number Nine Visual Technology. Sun, OpenWindows, Solaris, and
Ultra are trademarks or registered trademarks of Sun Microsystems, Inc. in
the United States and other countries. SPARC is a registered trademark of
SPARC International, Inc. Products bearing SPARC trademarks are based
upon an architecture developed by Sun Microsystems, Inc. UNIX is a
registered trademark of The Open Group in the United States and other
countries. VGA is a trademark of International Business Machines
Corporation. X Window System is a trademark of The Open Group.
Summary of Contents for DOME Md5/DFP
