Planar DOME Md5/DFP, Installation Manual

Page: 61 / 112

Configuring Display Settings on Windows NT | 49
Using the DOME tab online help
The Windows NT driver (version 4.4.0 or later) provides online,
context-sensitive help for the DOME tab. You can access the help
in either of these two ways:
• Click the question mark (?) button on the title bar, then click
on the DOME tab field with which you need assistance.
• Move the cursor to the DOME tab field with which
you need assistance, and press <F1>.
Setting the screen configuration
In the Configuration field of the DOME tab, highlight the screen
number and orientation. Click Apply or OK.
Each Md5/DFP board supports one or two digital flat panels.
Keep these points in mind:
• Version 4.4.0 or later of the driver supports up to 8 boards
(16 screens).
• The screens are assigned to the boards in the order in which
the boards are found on the bus. For example, if the first board
is a dual-headed board, it controls panels 1 (one) and 2.
Changing the resolution
In the Resolution field of the DOME tab, highlight the desired
resolution then click Apply or OK.
Setting brightness
In the Brightness field of the DOME tab, select the flat panel from
the drop-down box. Flat Panel 1 (one) is the left or top flat panel.
Slide the scroll box or use the left and right arrows to set
brightness for each flat panel. (The default brightness is 100%.)
Click OK.