Planar DOME Md5/DFP, Installation Manual

Page: 59 / 112

Configuring Display Settings on Windows NT | 47
11. Click No.
You can now change your display properties using the
DOME tab.
12. Right-click the desktop, and select Properties -> DOME.
A dialog box prompts you to choose a configuration file
(because the system is currently in VGA mode).
13. Click Open to use the default configuration file (
fp5pcy.cfg
)
on your system.
The DOME tab for VGA mode appears.
14. Click OK or Apply to activate all the new settings.
This message appears:
Do you want to restart your computer now?
15. Click Yes.
The system prompts you to select an operating system.
16. Select Windows NT Workstation 4.00.
Not all flat-panel display properties and information
appear in VGA mode. After you restart your computer,
enter the DOME tab to access all flat-panel configuration
options and information.