Planar DOME Md5/DFP, Installation Manual

Page: 92 / 112

80 | Installing the Board and Driver in a Sun PCI Workstation
Overriding the default display mode
Edit the
OWconfig
file to override the default display mode and
customize your configuration for OpenWindows or CDE. This
file is located in the
/usr/openwin/server/etc
directory on
the workstation.
To edit the OWconfig file
1. Check to see if the
/etc/openwin/server/etc/OWconfig
file exists on your workstation. If it does not, you must log on
as
root
and create the missing directories with
mkdir
.
2. Find and copy these 10 lines of the
OWconfig
file in
/usr/openwin/server/etc
directory.
#class = "XSCREENCONFIG" name="DOMEmd5dfp0Config"
# device="/dev/md5dfp0.0"
# res="1536x2048 Panel"
# monitor="domegray.vda"
# board="md5dfp-2hd.xqa";
#class = "XSCREENCONFIG" name="DOMEmd5dfp1Config"
# device="/dev/md5dfp0.1"
# res="1536x2048 Panel"
# monitor="domegray.vda"
# board="md5dfp-2hd.xqa";
To start CDE or OpenWindows using the default display mode,
skip this section.
When you edit or modify code, type it on one line.
A backslash (\) indicates continuation of the line.