Planar DOME Md5/DFP, Installation Manual

Page: 88 / 112

76 | Installing the Board and Driver in a Sun PCI Workstation
4. To transfer the software packages to the system, type:
pkgadd -d md5fZZZ.pkg
where
ZZZ
= the revision of the software on the CD.
This message appears:
The following packages are available:
1 DOMEmd5f DOME Md5DFP Display Support
(sparc) 1.0.x
2 DOMEmdlib DOME MD library
(sparc) 1.2.x
Select package(s) you wish to process (or 'all'
to process all packages).
(default:all) [?,??,q]:
5. Press <Return> to install all packages.
Messages appear, followed by this prompt:
Do you want to continue with the installation of
the package [y,n,?]
6. Type
y
.
Messages describe the progress of the installation. When
the installation is complete, these messages appear:
Installation of <DOMEmdlib> was successful.
Installation of <DOMEmd5f> was successful.
You do not need to reboot your system unless you did not
boot it with the
-r
option after you installed the board.
See page 72.
Check the name of the file on the CD to get the
software revision.