Manual
Version
Page
DB04A
EN A1-9
PKP Prozessmesstechnik
20
3.16. How to replace the battery?
When you replace or install a
battery, all power to the unit should
be disconnected.
The battery is in plastic compartment
mounted above the body and connected to
the main display/electronics housing. This
plastic part has 3 notches on each side. With
one hand hold the housing on the sides of
the display and with your other hand grab the
side where the plastic notches are located.
Pull the battery compartment from the main
housing. Replace the battery and push the
battery compartment back on the main
housing.
By pushing the battery compartment into
place you automatically connect the battery
to the electronics. It will take a few seconds
for the meter to start up.
You have to press the screen for about 3
seconds in order to switch the unit on.
Replacing the battery will not automatically
turn on the unit.
Inserting the battery incorrectly will not
damage the unit.
Please dispose of the
battery on an
environmental
friendly way
(Recycle)
