PKP DB04A, Instruction Manual

Page: 4 / 51

Manual Version Page
DB04A EN A1-9 PKP Prozessmesstechnik 04
Oxygen service
PKP is not liable for any damage or personal injury, whatsoever, resulting from the use of our
standard mass flow meters or controllers for oxygen gas. You are responsible for determining if
this mass flow meter or controller is appropriate for your oxygen application. You are responsible
for cleaning the mass flow meter or controller to the degree required for your oxygen flow
application.
Trademark
DB04A is a Trademark of PKP. Other product and company names listed in this manual are
trademarks or trade names of their respective manufacturers.
Receipt of your instrument
When receiving the instrument, carefully check the outside packing carton for damage that may
have incurred during shipment. If the carton is damaged, notify the local carrier and submit a report
to the factory or distributor. Remove the packing slip and check that all ordered components are
present and match your specifications (as ordered). Make sure any spare parts or accessories are
not discarded with the packing material. Do not return any equipment to the factory without first
contacting PKP:
E-mail Customer Service:
info@pkp.de
Installation
Please note before the start-up:
•
Do not use sealing tape or liquid sealant
•
Piping must be cleaned before installation of instrument.
Products in this manual may contain metal or elastomer seals, gaskets, o-rings or valve seats. It is
the “user’s” responsibility to select materials that are compatible with their process and process
conditions. Using materials that are not compatible with the process limitations of the device, may
result in equipment damage and/or personnel injury or death.
It is recommended that the user check the devices on a regular schedule to ensure that it is leak
free as both metal and elastomer seals, gaskets, o-rings and valve seats may change with age and
exposure to process gas.
Power
If it becomes necessary to remove the instrument from the system or change a battery, the power
to the device must be disconnected. Always switch off the power before you disconnect terminal
connections in potentially dangerous surroundings to avoid sparks.