Manual
Version
Page
DB04A
EN A1-9
PKP Prozessmesstechnik
25
4.11.2 Alarm Menu
If you have installed the optional alarm module and once the alarm function is selected from the
main menu, you can select which of the 3 alarms (A1, A2 or A3) you want to configure. Please
note that alarm 3 has a different contact type and capacity than alarms 1 and 2 (see diagram in
2.15 Optional Modules
). If an alarm has already been configured the primary function is mention
behind the Alarm (f.i. A1: flow high).
4.11.2.1 Select Alarm Menu
Once you selected A1, A2 or A3, you go into the specific alarm menu. You have the following
options:
Enable:
If you active this, the alarm becomes operational. You can
see that an alarm is enabled on any home screen. If an alarm has
been enabled the corresponding alarm name is shown underlined
(see picture on the right).
Reset:
If applicable you can manually reset an alarm here (The other reset location is on
the alarm home screen). If the alarm is enabled you see a star ( ) behind the word “Reset”.
Function:
With this submenu you can set the function of the alarm (Options: Flow high, low
or window and totalizer). For more details see chapter
4.11.2
