Manual
Version
Page
DB04A
EN A1-9
PKP Prozessmesstechnik
03
Copyright and Liability Disclaimer
All rights reserved. No part of this publication may be reproduced in any form or by any means
without the publisher's prior written permission.
The content of this manual is provided for information only and may be altered without prior notice.
PKP Prozessmesstechnik assumes no responsibility or liability for any errors or inaccuracies in
this manual.
This symbol alerts the user to important operating, maintenance and service
information.
Important instructions
•
Do not remove the electronics housing. A damaged hologram seal will void the warranty.
•
There are no serviceable parts inside the unit.
•
Repairs must only be performed by qualified personnel
Attention
This unit has several power supply possibilities. If you use the external 24 Vdc power supply, it is
strongly recommended to have this device grounded.
Subject to change
Due to our policy of ongoing product development, we reserve the right to change the information
in this manual without notice.
Recycling
Note the existing regulations of your country.
Toxic, flammable gases and ATEX
In the case of toxic and flammable gases, the respective safety guidelines in each country must be
followed. This
DB04A
device is
NOT
Ex certified. In the case of flammable and toxic gases, fittings,
cable glands and pipes intended for that purpose must be used. The responsibility for safe
operation lies with the user and designer of the facilities.
